Safety Requirements - NCR OPTIC 5 Installation Instructions Manual

Preface
Audience
This book is written for hardware installer/service personnel, system integrators, and
field engineers.
Notice: This document is NCR proprietary information and is not to be disclosed or
reproduced without consent.

Safety Requirements

The NCR RealPOS XR7 conforms to all applicable legal requirements. To view the
compliance statements see the
(B005-0000-1589).
Caution: The on/off switch is a logic switch only. The AC line voltage primaries are live
at all times when the power cord is connected. Therefore, disconnect the AC power
cord before opening the unit to install features or service this terminal.
Lithium Battery Warning
Warning:
the same or equivalent type as recommended by the manufacturer. Discard used
batteries according to the manufacturer's instructions.
Attention: Il y a danger d'explosion s'il y a remplacement incorrect de la batterie.
Remplacer uniquement avec une batterie du même type ou d'un type recommandé
par le constructeur. Mettre au rébut les batteries usagées conformément aux
instructions du fabricant.
Battery Disposal (Switzerland)
Refer to Annex 4.10 of SR814.013 for battery disposal.
IT Power System
This product is suitable for connection to an IT power system with a phase-to-phase
voltage not exceeding 240 V.
Peripheral Usage
This terminal should only be used with peripheral devices that are certified by the
appropriate safety agency for the country of installation (UL, CSA, TUV, VDE) or those
which are recommended by NCR Corporation.
Warning:
is connected to AC power. This can result in system or printer damage.
Warning:
is connected to AC power. This can result in system or printer damage.
NCR RealPOS Terminals Safety and Regulatory Statements
Danger of explosion if battery is incorrectly replaced. Replace only with
DO NOT connect or disconnect the transaction printer while the terminal
DO NOT connect or disconnect any serial peripherals while the terminal
i