Slip Format - NCR 7158 Owner's Manual

Slip Format

Maximum print line width: 120.7 mm (4.752 inches) starting 3.20 mm ±
1.5 mm (.125 inch ± .060 inch) from the right edge of the form.
Character Cell
Character Size
Character Per Line
Graphics Capability
Print line height: 7 dots @ 1/72 inch + Extra Dot Rows:
0 EDR between lines: 2.47 mm (.097 inch) ±5% = 10.3 LPI
1 EDR:
2 EDR:
3 EDR (standard):
4 EDR:
5 EDR:
N EDR:
Minimum top margin (form against form stop):
Minimum top margin (after reverse feeding):
Minimum bottom margin:
Standard Font
10 half dots x 7 dots
7 x 7
66 @ 13.9 CPI
330 full dots
660 half dots
2.82 mm (.111 inch) ±5% = 9.0 LPI
3.18 mm (.125 inch) ±5% = 8.0 LPI
3.53 mm (.139 inch) ±5% = 7.2 LPI
3.88 mm (.153 inch) ±5% = 6.5 LPI
4.23 mm (.167 inch) ±5% = 6.0 LPI
(7+N)/72 in. ±5%
Chapter 5: Technical Specifications 5-13
Compressed Font
10 half dots x 7 dots
7 x 7
80 @ 17.1 CPI
N/A
N/A
16.0 mm (.63 inch)
5.0 mm (.20 inch)
15.0 mm (.59 inch)