Perform Full Knife Cut; Perform Partial Knife Cut; Generate Tone - NCR 7158 Owner's Manual

7-24 Chapter 7: Programming Guide

Perform Full Knife Cut

ASCII:
Hexadecimal:
Decimal:
Cuts the receipt, leaving .20 inch (5 mm) of paper. This command is
implemented the same as Partial Knife Cut (1A, 1B 6D). There are two
codes for this command. Both codes perform the same function.
Line Feed is executed first if print buffer is not empty.
This command is processed regardless of which station is selected.

Perform Partial Knife Cut

ASCII:
Hexadecimal:
Decimal:
Cuts the receipt, leaving 5 mm (.20 inch) of paper. This command is
implemented the same as Full Knife Cut (19, 1B 69).
There are two codes for this command and both perform the same
function.
Exceptions:
Line Feed is executed first if the buffer is not empty.
This command is processed regardless of which station is selected.

Generate Tone

ASCII:
Hexadecimal:
Decimal:
Generates an audible tone. Performed by the printer to signal certain
conditions.
EM or ESC i
19 or 1B 69
25 or 27 105
SUB or ESC m
1A or 1B 6D
26 or 27 109
ESC BEL
1B 07
27 7