Receipt Test Mode - NCR 7158 Owner's Manual

3-22 Chapter 3: Using the Printer
3. Run a transaction from the host computer.
All commands and data sent from the host computer will be
printed as hexadecimal numbers as shown in the illustration.
To exit the Datascope Mode:
1. 1. Enter the Configuration Menu again.
2. Disable the Datascope Mode.
3. Exit the Configuration Menu.
The printer is in Normal Mode and can communicate with the host
computer.

Receipt Test Mode

To run the Receipt Test Mode:
1. Enable the Receipt Test Mode through the Configuration Menu. See
"Configuring the Printer," for instructions on how to enter the
Configuration Menu.
2. Push Paper Feed Button and the receipt station will print two code
pages.
3. The test ends with a cut.
4. Go to step 2 again to repeat this test.
To exit the Receipt Test Mode:
5. Enter the Configuration Menu again.
6. Disable the Receipt Test Mode.