Defining User-Defined Characters For The Slip And Receipt Station - NCR 7158 Owner's Manual

7-60 Chapter 7: Programming Guide
Defining User-Defined Characters for the Slip and Receipt
Station
Defines and enters downloaded characters into RAM.
(Define User-Defined Characters—continued on the next page)
Receipt Characters (1B 26 3)
Top of Character
d1 d4
d2 d5
d3 dn
Values and Ranges:
Receipt
c = the ASCII codes of the first (c1) and last (c2) characters respectively
c1 = Hex 20-FF (Hex 20 is always printed as a space)
c2 = Hex 20-FF (Hex 20 is always printed as a space)
To define only one character, use the same code for both c1 and c2.
n = the number of dot columns for the nth character as specified by
n1 ... nn
Slip Characters (1B 26 0)
Top of Character
d1 d4
MSB
dn
LSB
MSB
dn
d
10
LSB
Most Significant
Bit Is Not Printed