Slip Test Mode; Micr Test Mode - NCR 7158 Owner's Manual

7. Exit the Configuration Menu.
The printer is in Normal Mode and can communicate with the host
computer.

Slip Test Mode

To run the Slip Test Mode:
1. Enable the Slip Test Mode through the Configuration Menu, (See
"Configuring the Printer," for instructions on how to enter the
Configuration Menu). Then exit the Configuration Menu.
2. Insert a slip into the slip station.
3. Push the Paper Feed Button.
4. Two code pages will be printed.
5. Go to step 2 again to repeat this test.
To exit the Slip Test Mode:
6. Enter the Configuration Menu again.
7. Disable the Slip Test Mode.
8. Exit the Configuration Menu.
The printer is in Normal Mode and can communicate with the host
computer.

MICR Test Mode

MICR Test Mode allows the user to test whether the MICR is operating
correctly. When the printer is in this mode the MICR reads the
characters on a check as usual, but instead of transmitting the values to
the software it prints them on receipt paper.
To run the MICR Test Mode:
1. Enter the Configuration Menu. See "Configuring the Printer," for
instructions on how to enter the Configuration Menu.
Chapter 3: Using the Printer 3-23