7-68 Chapter 7: Programming Guide
Select or Cancel Upside Down Printing Mode
ASCII:
Hexadecimal:
Decimal:
Value of n:
Default:
Prints upside-down characters. The character order is inverted in the
buffer so text is readable. The command remains in effect until the
Rotated Print (1B 12) command is received. Only bit 0 is used. Bits 1-7
are not used. See Summary of Rotated Printing in this document for
more information.
Exceptions:
The command is valid only at the beginning of a line.
The Rotated Print command (1B 12) cancels this command.
ESC { n
1B 7B n
27 123 n
0 = Cancel
1 = Set
0 (Cancel)