Slip Throughput - NCR 7158 Owner's Manual

5-14 Chapter 5: Technical Specifications

Slip Throughput

Bi-directional line speed is based on a printhead speed of 260 CPS.
Throughput (±5%) at the standard line spacing (7.2 LPI) depends on
line length expressed in characters:
Line Length
40 Chars.
52 Chars.
66 Chars.
80 Chars.
Unidirectional (graphics) line speed, will be half the above throughput.
Minimum form width for full width print = 127 mm (5.00 in.)
Printable Zone, 330 Full Dots = 120.7 mm (4.752 in.)
Nominal Margins = 3.2 mm (0.125 in.)
Character Density
13.9 CPI (standard)
13.9 CPI (standard)
13.9 CPI (standard)
17.1 CPI (compressed)
Top Edge
Minimum with Slip Stop 16.0 mm (0.630 in.)
Minimum 15.0 mm (0.59 in.)
Trailing Edge
Lines Per Minute
290 LPM
237 LPM
195 LPM
166 LPM