7-124 Chapter 7: Programming Guide
Select Print Direction in Page Mode
ASCII:
Hexadecimal:
Decimal:
Value of n:
Selects the printing direction and start position in Page Mode. See the
illustration.
0 = Upper left corner proceeding across page to the right (A)
1 = Lower left corner proceeding up the page (B)
2 = Lower right corner proceeding across page to the left
(upside down) (C)
3 = Upper right corner proceeding down page (D)
A
Default:
0 (Upper left corner proceeding across page to the right)
The command can be sent multiple times so that several different print
areas, aligned in different print directions, can be developed in the
printer's page buffer before being printed by the Eject Slip command
(0C).
Exceptions:
This command is valid only in Page Mode. This command is ignored if
the value of n is out of the specified range.
ESC T n
1B 54 n
27 84 n
Start position