Optional Features - NCR 7158 Owner's Manual

Optional Features

Rotary partial cut knife leaves 5.0 mm (0.2 inch) uncut on
Paper Cutter
left edge.
Extends Slip Table 38 mm (1.5 in.) or 76 mm (3.0 in.) in
Slip Table Kits
front.
MICR and Flip options.
Integrated into the slip station.
MICR Reader
Reads MICR checks oriented for validation on the back of
the check, and communicates the character string to the
host computer.
Reads E13B and CMC7 MICR Fonts (Auto discriminates).
Error and fraud prevention feature.
Check Flip
Turns validated checks over for printing on the face of the
check.
55W standard
Remote Power
75W available
Supply
Auto-Ranging input
24Vdc output
RS-232C, 9 pin connector
Interface daughter
USB
PCBs
Chapter 5: Technical Specifications
The 76 mm slip table comes standard with the
5-7