Power Requirements; Power Modes; Power From Host; Power From External Power Supply - NCR RealPOS 7199 User Manual

Printer Specifications

Power Requirements

The printer receives power either from a host system (integrated) or from a separate in–
line power supply (remote) which can be purchased separately. Models receiving power
from a power supply use one cable for communication and a separate cable for power.

Power Modes

Below are the available power modes of the printer.
• NCR Terminal Power–Low Mode (Term Pwr–Low): Maximum allowable printing
• NCR Terminal Power–High Mode (Term Pwr–High): Maximum allowable printing
• NCR 60W Power Supply Mode (NCR 60W Ext Pwr): Maximum allowable printing
• NCR 75W Power Supply Mode (NCR 75 Ext Pwr): Maximum allowable printing

Power from Host

The host computer must provide a +24V supply to the printer. Voltage variation in the
24V line may be within 21.6 and 26.4 volts. Surge protection must be provided. To do
this, place a 3.2 Ampere time delay fuse on the +24V line.

Power from External Power Supply

The external power supply must provide a +24V line of power to the printer. Surge
protection must be provided.
• When NCR 75W external power supply is used, select (NCR 75W Ext Pwr) mode.
• When NCR 60W external power supply is used, select (NCR 60W Ext Pwr) mode.
cycle power consumption is 55W.
cycle power consumption is 55W.
cycle power consumption is 60W.
cycle power consumption is 75W.
A-129