Vertical Positioning And Print Commands; Print And Feed Paper One Line; Print And Eject Slip - NCR 7158 Owner's Manual

7-36 Chapter 7: Programming Guide

Vertical Positioning and Print Commands

The vertical positioning and print commands control the vertical print
positions of characters on the receipt and slip.

Print and Feed Paper One Line

ASCII:
Hexadecimal:
Decimal:
Prints one line from the buffer and feeds paper one line.
Carriage Return/Line Feed pair prints and feeds only one line.

Print and Eject Slip

ASCII:
Hexadecimal:
Decimal:
Prints data from the buffer to the slip station and if the paper sensor is
covered, reverses the slip out the front of the printer far enough to be
accessible to the operator. The impact station opens the platen in all
cases.
This command has the same code as the Print and Return to Standard
Mode command, which is executed only when the printer is in Page
Mode. When the printer is not in Page Mode this command executes
the print and eject slip function.
Exceptions:
This command is ignored if the receipt station is the current station.
LF
0A
10
FF
0C
12