Execute Macro - NCR 7158 Owner's Manual

7-130 Chapter 7: Programming Guide

Execute Macro

ASCII:
Hexadecimal:
Decimal:
Value of r:
Value of t:
Executes a macro. After waiting for a specified period the LED
indicators blink and the printer waits for the Paper Feed Button to be
pressed. After the button is pressed, the printer executes the macro
once. The printer repeats this operation the number of specified times.
When the macro is executed by pressing the Paper Feed Button (m = 1),
paper cannot be fed by using the Paper Feed Button.
Formulas:
The waiting time is t x 100 msec for every macro execution.
m specifies macro executing mode when the LSB (Least significant bit)
m = 0
The macro executes r times continuously at the interval specified by t
when the LSB (Least significant bit) of m = 1.
Exceptions:
If this command is received while a macro is being defined, the macro
definition is aborted and the definition is cleared.
If the macro is not defined or if r is 0, nothing is executed.
This command is available in A758 Native Mode only.
GS ^ r t m
1D 5E r t m
29 94 r t m
The number of times to execute the macro.
The waiting time for executing the macro.