Standard Receipt Features
MICR Reader – Additional Information
•
The check must be flat and void of curls, folds, or wrinkles
(especially at the edges). Wrinkled checks may rub against the
ribbon causing them to become ink-stained.
•
Checks must be void of clips or staples. Paper jams, MICR read
errors, and/or MICR head damage could occur.
•
Immediately release the check once the printer starts to feed it.
Failure to release the check could skew it, causing paper jams and
MICR read errors.
Print Technology
Print Resolution
Character Cell
Print Width
Enhanced Print
Print Line Spacing
Print Line Rate
Paper Feed
Paper Sensing
Operator Interface
Direct thermal
640 dot printhead
203 DPI horizontal and vertical
8 dots/mm
Standard 13 X 24
Compressed 10 X 24
Standard 44 characters @ 15.6 CPI
Compressed 56 characters @ 20.3 CPI
Double Wide, Double High, Rotated, Underlined,
Scalable, Italic, Superscript, Subscript, Bold, and Reversed
Image characters
7.52 lines/inch, standard
38.4 LPS for text at standard spacing. See Receipt
Throughput
Unidirectional, 130mm/second maximum. See Receipt
Throughput
Paper exhaust switch
Paper low switch (adjustable).
Paper Feed Button on cabinet
Chapter 5: Technical Specifications
5-5