Select 90 Degree Counter-Clockwise Rotated Print - NCR 7158 Owner's Manual

7-54 Chapter 7: Programming Guide

Select 90 Degree Counter-Clockwise Rotated Print

ASCII:
Hexadecimal:
Decimal:
Rotates characters 90 degrees counter-clockwise. The command
remains in effect until the printer is reset or until a Clear Printer (0x10),
Select or Cancel Upside-Down Print (1B 7B), or Select or Cancel
Rotated Print (1B 56) command is received.
Exceptions:
This command is valid only at the beginning of a line.
Rotated print and non-rotated print characters cannot be used together
in the same line.
Related Information:
See Summary of Rotated Printing in this chapter.
ESC DC2
1B 12
27 18