Reboot The Printer - NCR 7158 Owner's Manual

Reboot the Printer

ASCII:
Hexadecimal:
Decimal:
Ends the load process and reboots the printer. Before executing this
command, the printer should have firmware loaded and external
switches set to the runtime settings. Application software for
downloading should prompt the user to set the external switches and
confirm before sending this command. If the downloading was started
from a diagnostic, the reboot will cause the printer to reenter download
state unless the external switches are changed.
GS (SPACE)
1D FF
29 255
Chapter 7: Programming Guide 7-157