Slip Forms - Recommendations - NCR 7158 Owner's Manual

Direction of
Paper Feed
Bound Edge on Top or Right
Paper feeding and insertion
affected by the binding method,
length of page, and the quality of
the adhesive used.)

Slip Forms - Recommendations

The slip form should be flat and void of curls or wrinkles, especially at
the top.
Considerations for bound edges on slip paper (multi-page forms):
•
Binding on the leading edge (top): Best method, however paper
feeding and insertion can be affected by the binding method, the
length of the edge, and the quality of glue used.
•
Binding on the right edge: Paper feeding and insertion can be
affected by the binding method, the length of the edge, and the
quality of glue used.
•
Binding on the Left edge or wide slip paper: Skewing may occur.
•
Binding on the bottom edge: Not recommended
Chapter 5: Technical Specifications
Bound Edge on Left
Scewing can occur
Bound Edge on Bottom
Do NOT use
20526
5-3