Receipt Media - NCR 7158 Owner's Manual

Receipt Media

Minimum form length (feed direction) for forms inserted from the
front up to the slip stop is 68 mm (2.68 inches) w/o check flip option
and 70 mm (2.75 inches) w/Flip option. Minimum form width (print
direction) is 51 mm (2.00 inches). These minimums ensure the form
covers both optical slip detectors, and expose about one inch of the
form to push in place.
The form must be at least 127 mm (5.00 inches) wide to print all 66
standard or 80 compressed columns. Large forms may be inserted
from the left side and override the slip stop. Forms over 170 mm (6.70
inches) wide will extended outside the left side of the printer.
•
Direct thermal paper, with or without environmental coating.
•
Paper thickness range:
•
Receipt roll width:
•
Receipt roll diameter:
•
Receipt roll capacity: *
•
Roll construction:
•
End-of-roll warning:
* Based on core diameter of: 22 ± .5 mm (.87 inch) outside,
Chapter 5: Technical Specifications 5-11
51–86 µm (2.0–3.4 mil).
80 + .2 - .6 mm (3.150 + .008 - .024 inch).
90 mm (3.54 inch) maximum.
98M (322 feet) of 61µm (2.4 mil) thick
paper
73.5M (241 feet) of 81µm (3.2 mil) thick
paper
Image side facing out.
Stripe recommended, not required.
11.5 ± .5 mm (.45 inch) inside.