Chapter 2: Setup Guide; Unpacking The Printer - NCR 7158 Owner's Manual

Chapter 2:

Unpacking the Printer

Setup Guide
Save all packing materials in case you need to repack the printer.
Check that the materials shipped with the printer match.
•
Printer enclosed in a plastic bag and foam pack
•
Thermal receipt paper roll (inside receipt bucket)
•
Test printout protecting the printhead (inside receipt bucket)
•
Cardboard support for cantilever (on slip table)
•
Foam restraint for carriage (behind front cover)
•
Power supply with cable connecting to printer and power supply
cord connecting to power outlet (only if ordered with the printer)
•
Ribbon cassette
•
Installation report card (please complete this form and return to
NCR)
•
7158 Thermal Receipt and Impact Slip Printer: Setup Guide
•
Communication cable, if ordered with the printer (from host
computer to printer)
To report any missing materials, or to report a printer that was
damaged during shipping, call your supplier or call an NCR
representative.