Physical And Operating Environment; Temperature And Humidity; Electrical; Slip Media - NCR 7158 Owner's Manual

5-10 Chapter 5: Technical Specifications

Physical and Operating Environment

Temperature and Humidity

Electrical

Slip Media

Operating: w/ Knife
Operating: w/o Knife
Storage:
Transit:
The 7158 printer complies with the regulatory EMI standards and
levels indicated in the section on Certifications when tested as a stand-
alone unit.
When connected to a host terminal or system, the 7158 also complies
with these standards and levels, provided that the host terminal or
system first complies without the 7158 printer connected.
The 7158 prints 1 to 5 part forms with the following limitations:
•
The minimum thickness of a single part form is .08 mm (.003 inch).
•
If present in a multi-part form, cardstock will be the bottom part.
•
Maximum total thickness is .40 mm (.016 inch).
•
Minimum form reflectivity is 60%
Temperature in Degrees
5C to 28C ( 41F to 82F)
28C to 45C ( 82F to 113F)
5C to 35C ( 41F to 95F)
35C to 50C ( 95F to 122F)
-10C to 50C ( 14F to 122F)
-40C to 60C (-40F to 140F)
%Humidity
10 to 90
10 to 35
5 to 90
5 to 40
5 to 90
5 to 95