Power Requirements; Environmental Conditions - NCR 7167 Owner's Manual

7167 Owner's Manual
Paper Diameter
Paper Length
Paper Width
Paper Thickness
Printable Area

Power Requirements

The 7167 printer receives power from a separate power supply. Here are the voltage
requirements for the power supply.
Voltage
24.0 V ± 10%

Environmental Conditions

Operating Temperature
Operating Humidity
Condensation may occur when equipment is transferred from cold to
warm areas after shipment. The printer's design permits operation after
drying out and stabilizing at room temperature.
Thermal Receipt Station
80 mm Max.
83 Meters (273 feet)
80 mm ± 1mm
(3.15 Inches ± .02 Inches)
Not Applicable
2.83 Inches (Max.)
Station
Slip
Receipt
5°C to 45°C (40°F to 112°F), models with knife
5°C to 50°C (40°F to 120°F), models with no knife
5% to 90%
Impact Slip Station
Not Applicable
Side Insertion: 2.0 Inches (Min.)
Front Insertion: 2.75 Inches (Min.)
Side Insertion: 8.0 Inches (Min.)
Front Insertion: 2.0 Inches (Min.)
.406 mm (.016 Inch)
3.22 Inches (Max.)
Maximum Current
Short Term Long Term
4.6 Amps 3.15 Amps
6.5 Amps 3.15 Amps
November 2002
Appendix A: Specifications
213