Graphics Commands; Download Bmp Logo - NCR 7158 Owner's Manual

7-74 Chapter 7: Programming Guide

Graphics Commands

These commands are used to enter and print graphics data and are
described in order of their hexadecimal codes.

Download BMP Logo

ASCII:
Hexadecimal:
Decimal:
Value:
Enters a BMP file into RAM or Flash.
This command is used by sending the file data of a monochrome BMP
file preceded by a hexadecimal 1B character. The bit map is stored in the
printer in the same manner as a downloaded bit image.
The downloaded BMP file can be printed by using the Print
Downloaded Bit Image (1D 2F m) command.
Exceptions:
BMP file images that are not monochrome are ignored. This command
is only valid for the receipt station.
Note: This is only available in A758 Native Mode. If multiple logos
are to be defined and used, this command should be preceded by the
Select Current Logo Command to define the number by which this
downloaded logo is to be referenced.
Related Information:
See 1D 22 n (Select Memory Type to save logos.)
ESC followed by the BMP file data characters
1B followed by the BMP file data characters
27 followed by the BMP file data characters
Maximum width =
Maximum height =
576
512