7197 Service Manual
Noise
Graphics (Optional)
ECO
Other
Paper Diameter
Paper Length
Paper Width
Paper Thickness
Printable Area
Power Requirements
The 7197 Series II printer receives power from a separate power supply. Here are the
voltage requirements for the power supply.
Voltage
24.0 V ± 10%
Environmental Conditions
Operating Temperature
Operating Humidity
Condensation may occur when equipment is transferred from cold to
warm areas after shipment. The printer's design permits operation after
drying out and stabilizing at room temperature.
215
Thermal Receipt Station
57 dBA Sound Pressure (ISO 7779)
User-Defined Graphics, Logo
Paper reduction, Power reduction
No Reverse Paper Feed
80 mm Max.
83 Meters (273 feet)
80 mm +0.5mm /-1.2mm
(3.15 Inches +0.02Inches/-0.047 Inches)
58 mm +0.5mm / -1mm
(2.28 Inches +0.02Inches/-0.039)
Not Applicable
2.83 Inches (Max.)
Station
Receipt
5°C to 20°C (40°F to 120°F), models with knife
5% to 90%
August 2011
Appendix C: Ordering Paper and Supplies
Maximum Current
Short Term
Long Term
6.5 Amps
3.15 Amps