Options
Connectivity Options
Thermal Receipt Printer Options
Impact Slip Printer Options
Electronics and Firmware Options
•
RS-232C is supported on all printers. USB is also supported on
some later models.
•
Communications cables are available for RS-232C and USB.
•
Power supplies are available in 55 Watt or 75 Watt versions.
•
3-pin to 6-pin power connection adapter to allow previous version
power supplies (or terminal cables) to be connected to the 7158.
•
The optional receipt cutter.
•
The slip table is available in either standard or 2 extended sizes. An
extended slip table is standard with the MICR check reader and flip
options.
•
The Magnetic Ink Character Recognition (MICR) check reader is
built into the slip station. It reads checks that use standard E13B or
CMC7 MICR fonts.
•
Check Flip Option: after reading the MICR line on the front of the
check and printing on the back, the printer is able to flip the check
over and print on the face of the check.
•
1 MB or 2 MB Expanded flash memory is available as factory
configurations.
Chapter 1: About the Printer
1-5