Reverse Feed N Dots; Set Horizontal And Vertical Minimum Motion Units - NCR 7158 Owner's Manual

7-44 Chapter 7: Programming Guide

Reverse Feed n Dots

ASCII:
Hexadecimal:
Decimal:
Value of n:
Range of n :
Reverses the paper feed in the slip station by n dots at 1/72 inch (NCR
7150™ command). This command is ignored if receipt station is
selected.

Set Horizontal and Vertical Minimum Motion Units

ASCII:
Hexadecimal:
Decimal:
Value of x:
Value of y:
Range of x:
Range of y:
Default: of x:
Default: of y:
Sets the horizontal and vertical motion units to 1/x inch and 1/y inch
respectively.
When x or y is set to 0, the default setting for that motion unit is used.
The default horizontal motion is x = 203.
GS NAK n
1D 15 n
29 21 n
n dots at 1/72 inch
0 – 127
A756 Emulation
0 – 255
A758 Native
GS P x y
1D 50 x y
29 80 x y
Horizontal
Vertical
0 – 255
0-255
203
203
Mode
Mode