Erase Selected Flash Sector - NCR 7158 Owner's Manual

Erase Selected Flash Sector

ASCII:
Hexadecimal:
Decimal:
Value and Range of n:
0 – 7 = 512K bytes Flash
0 – 15 = 1M bytes Flash
0 – 31 = 2M bytes Flash
Erases the previously selected sector. The printer transmits ACK when
the sector has been erased. If the previous sector is not successfully
erased, or if no sector was selected, the printer transmits NAK.
Exceptions:
Available only in Download Mode.
GS DLE n
1D 10 n
29 16 n
Chapter 7: Programming Guide 7-155