Emulation/Software Options; Printer Emulations; Printer Id Mode - NCR 7158 Owner's Manual

3-26 Chapter 3: Using the Printer

Emulation/Software Options

3. Push Paper Feed Button.
The check then goes through the flip routine only—no printing takes
place.
To exit the Check Flip Test Mode:
4. Enter the Configuration Menu again.
5. Disable the Check Flip Test Mode.
6. Exit the Configuration Menu.
The printer is in Normal Mode and can communicate with the host
computer.

Printer Emulations

Printer emulations determine the commands that are available to the
printer. They are set by using the Configuration Menu. (See
"Configuring the Printer" for instructions on how to enter the
Configuration Menu.) The available options are:
•
7158 Native (enables all new functions)
•
7156 Emulation (for use with legacy software)

Printer ID Mode

This switch is used to determine what Printer ID value is returned in
response to a Transmit Printer ID (1D 49 01) when the printer is in 7156
Emulation Mode. The printer can be configured to send back the ID of
the 7158 or the 7156.