7-42 Chapter 7: Programming Guide
Print and Feed Paper
ASCII:
Hexadecimal:
Decimal:
Value of n:
Range of n:
Prints one line from the buffer and feeds the paper.
On the receipt station, the line height equals the character height when
n is too small. This does not apply to the slip station. Use n = 0 to print
a line without feeding the paper. This allows the printer to print on the
last line of the slip (at .59 inches from the trailing edge) and still retain
the slip in the feed rollers for reverse feeding the paper back out of the
slip station.
Related Information:
For more information, see the description of the Set Horizontal and
Vertical Minimum Motion Units command in this document.
Print and Reverse Feed Paper
ASCII:
Hexadecimal:
Decimal:
Value of n:
Range of n:
Prints one line from the buffer and reverse feeds the paper n/144 of an
inch on the slip station.
Exceptions:
The receipt station cannot be reverse fed.
ESC J n
1B 4A n
27 74 n
n/203 inches receipt
n/144 inches slip
0 - 255
ESC K n
1B 4B n
27 75 n
Slip = n/144 of an inch
0 - 255