Select Pitch For Hri Characters; Select Bar Code Height; Print Bar Code - NCR 7158 Owner's Manual

Select Pitch for HRI Characters

ASCII:
Hexadecimal:
Decimal:
Value of n:
Default:
Selects standard or compressed font for printing Bar Code characters.
When slip is selected as the interface, HRI is always compressed.

Select Bar Code Height

ASCII:
Hexadecimal:
Decimal:
Value of n:
Range of n:
Default:
Sets the bar code height to n dots or n/8 mm (n/203 inch) for receipt or
n/8.5 mm (n/216 inch) for slip.

Print Bar Code

ASCII:
Hexadecimal:
Decimal:
GS f n
1D 66 n
29 102 n
Pitch
0 = Standard Pitch at 15.2 CPI on receipt
1 = Compressed Pitch at 19 CPI on receipt
0 (Standard Pitch at 15.2 CPI)
GS h n
1D 68 n
29 104 n
Number of dots
1 - 255
162
First Variation
GS k m d1...dk NUL
1D 6B m d1...dk 00
29 107 m d1...dk 0
0 = End of command.
Chapter 7: Programming Guide 7-115
Second Variation
or GS k m n d1...dn
or 1D 6B m n d1...dn
or 29 107 m n d1...dn