7197 Owner's Guide
Paper Diameter
Paper Length
Paper Width
Paper Thickness
Printable Area
Power Requirements
The 7197 printer receives power from a separate power supply. Here are the voltage
requirements for the power supply.
Voltage
24.0 V ± 10%
Environmental Conditions
Operating Temperature
Operating Humidity
Condensation may occur when equipment is transferred from cold to
warm areas after shipment. The printer's design permits operation after
drying out and stabilizing at room temperature.
Reliability
The numbers in the table refer to the Mean Cycle Between Failure (MCBF) for the items
indicated.
Thermal Receipt Printer
Electronics
Communications Card
Control Panel
Knife
Power Supply
Dimensions and Weight
Height
Height with Cover Open
Width
Depth
Weight
68
Thermal Receipt Station
80 mm Max.
83 Meters (273 feet)
80 mm ± 1mm
(3.15 Inches ± .02 Inches)
Not Applicable
2.83 Inches (Max.)
Station
Receipt
5°C to 45°C (40°F to 112°F), models with knife
5°C to 50°C (40°F to 120°F), models with no knife
5% to 90%
45 Million Lines
460,000 On time Hours
1,300,000 On Time Hours
33,000,000 On Time Hours
1 Million Cuts
200,000 On-time Hours
155.50 mm (6.2 Inches)
255.50 mm (10.1 Inches)
145.50 mm (7.8 Inches)
183.50 mm (7.3 Inches)
1.53 Kg (3.4 Pounds)
Maximum Current
Short Term
Long Term
6.5 Amps
3.15 Amps
March 2002
Appendix A: Specifications