Select Superscript Or Subscript Modes - NCR 7158 Owner's Manual

7-72 Chapter 7: Programming Guide

Select Superscript or Subscript Modes

ASCII:
Hexadecimal:
Decimal:
Value of n:
Default:
Turns superscript or subscript modes on or off. This attribute may be
combined with other characters size settings commands ( 12, 13, 1B 21
n, 1D 21 n, ...)
This command is only available on the receipt station in A758 Native
Mode.
Exceptions:
This command is ignored if n is out of the specified range.
This is only available in A758 Native Mode.
AX ENQ n
1F 05 n
31 05 n
0 = Normal character size
1 = Select subscript size
2 = Select superscript size
0 (normal size)