Select Receipt Or Slip For Setting Line Spacing - NCR 7158 Owner's Manual

7-28 Chapter 7: Programming Guide

Select Receipt or Slip for Setting Line Spacing

ASCII:
Hexadecimal:
Decimal:
Value of n:
Default of n :
Selects which station receives the effects of the following commands:
1. Select Default Line Spacing (1B 32)
2. Set Line Spacing (1B 33)
3. Add n extra dot rows (16 n)
Exceptions:
This command is ignored if n is out of range.
ESC c 1 n
1B 63 31 n
27 99 49 n
1, 2, 3 Select receipt
4 Select Slip
1