REP 8.13 WASTE TONER SENSOR
PARTS LIST ON PL 8.1
REMOVAL
WARNING
Switch the Main Power off and disconnect the
Power Cord.
1. Remove the following:
a. Paper Guide (REP 8.1)
b. Paper Feed Assembly (REP 8.2).
2. (Figure 1): Remove the Waste Toner Sensor
cover and the Waste Toner Sensor.
Sensor Cover
and Arm
Waste Toner
Sensor
Figure 1. Removing the Waste Toner Sensor
DocuPrint C55/C55mp/[NC60]
REPLACEMENT
NOTE:
When reassembling the Waste Toner
Sensor and Cover make sure the arm slides
back and forth smoothly
A8
2/99
4-35
REPAIRS/ADJUSTMENTS
REP 8.13