Rep 12.12 A4 Paper Size Sensor; Rep 12.13 Casters - Xerox DocuPrint N2025 Service Manual

REP 12.12 A4 Paper Size Sensor

Parts List on PL 12.2
Removal
Switch off the power and disconnect the Power Cord.
1. Remove the 2000 Sheet Feeder Tray Assembly (REP 12.7).
2. Disconnect P/J612 from the Paper Size Sensor (Figure 1).
3. Release the two locking tabs and remove the Sensor (Figure 1).
Figure 1 Paper Size Sensor
Replacement
1. Reinstall the components in the reverse order.
Initial Issue
DocuPrint N2025/N2825
WARNING

REP 12.13 Casters

Parts List on PL 12.2
Removal
Switch off the power and disconnect the Power Cord.
1. Remove the Printer / 500 Sheet Feeder (REP 12.1).
2. Remove the Left Foot (REP 12.8).
3. Remove the Left Side Cover (REP 12.2).
4. Remove all paper from the 2000 Sheet Feeder tray.
5. Tilt the 2000 Sheet Feeder onto its left side (Figure 1).
NOTE: The front casters are locking casters and rear are not.
6. Remove the three screws that secure the defective caster (Figure 1).
Replacement
1. Reinstall the components in the reverse order.
02/2000
4-83
WARNING
Figure 1 Casters
Repair-Adjustment
REP 12.12 A4, REP 12.13