Removing The Front Door; Figure 5-3 Removing The Front Door, Tower Configuration - Silicon Graphics Origin200 Owner's Manual

Chapter 5: Origin200 Cosmetic Features and Covers

Removing the Front Door

116
The front door of an Origin200 server has several features:
• In a tower configuration, the door is designed to release from its hinges if it is struck
while open, or otherwise forced too far open.
• In a rackmount configuration, an additional spring-steel catch, called the door assist
tab, holds the door in place when it is open.
• In both rackmount and tower configurations, the door can be removed and
reattached easily without tools.
To remove the front door in a tower configuration, press down on the top of the door and
pull outward, as shown in Figure 5-3:
Figure 5-3 Removing the Front Door, Tower Configuration