Silicon Graphics Origin200 Owner's Manual page 8

Contents
5.
viii
Using the AUX Port and Module System Controller Commands 98
Attaching a Terminal or Modem to the AUX Port 99
Using the Module System Controller 100
Entering Supervisor Mode 100
Setting the MSC Password 101
Checking the System Temperature 101
Checking the Fans 102
Checking and Setting the Fan Speed 103
Checking If the System Is On or Off 103
Powering the System On and Off 104
Causing the System to Power-On Automatically 104
Resetting the System 105
MSC Error Messages 105
MSC Command Reference 105
Determining the Devices Installed on Your Server 107
How Devices Are Detected and Numbered 108
How to Use the Hardware Graph 108
Origin200 Cosmetic Features and Covers 113
Locking the System 113
Locking the Front Door 113
Locking the Chassis 114
Adjusting the Feet 115
Removing the Front Door 116
Removing the System Cover and Chassis Access Door 118
Removing the Side Panel, Feet, and Exterior Plastic Parts of a Tower System 121
Preparing to Remove Components 121
Removing the Feet and Exterior Plastic Parts 122