Table of Contents
Advertisement
About This Guide
xx
•
Chapter 8, "Installing and Configuring Peripherals," describes how to attach
various internal and external peripherals to an Origin200 module. These include
disk drives, tape drives, CD-ROM drives, and serial devices.
•
Chapter 9, "Troubleshooting and Maintenance," lists the message codes for the
system status LED, Ethernet port LEDs, and drive status LEDs, and describes how
to check the power supply.
•
Chapter 10, "Removing and Replacing Internal Components," shows how to
remove components from an Origin200 module, order replacement parts, and
install replacement parts.
In addition, this guide contains the following appendices:
•
Appendix A, "Connector Pinout Assignments," shows the pinouts of the various
connectors available on the Origin200 system.
•
Appendix B, "Cable Descriptions," describes various cables that can be used with
the Origin200 system, including serial, Ethernet, SCSI, parallel, and CrayLink
Interconnect.
•
Appendix C, "Supported Terminals," lists some common terminal types that are
supported by IRIX on the Origin200 system.
A glossary and index complete this guide.
Advertisement
Table of Contents
Troubleshooting
