Installing A Chassis In The Rack; Figure 3-5 Lifting The Origin200 Server Into A Rack - Silicon Graphics Origin200 Owner's Manual

Installing a Chassis in the Rack

Follow these steps to install the Origin200 chassis in an equipment rack.
1. Recommended: Lock the front door with the key. This prevents the door from being
pulled open accidentally while you install the server.
2. With a person on each side of the chassis, lift the server and move it to the
equipment rack, as shown in Figure 3-5.
Figure 3-5 Lifting the Origin200 Server Into a Rack
Warning:
Two people are required to lift an Origin200 system.
Installing a Chassis in the Rack
69