Figure 7-4 Example Pci Board With Feature Connectors - Silicon Graphics Origin200 Owner's Manual

Chapter 7: Installing and Removing PCI Option Boards
148
6. For PCI boards with feature connectors only. Some PCI boards from Silicon Graphics
provide an extra connector for additional signals used for multimedia applications.
To install such a board in an Origin200 server, you must install a cable from a
connector on the board to the feature connector on the PCI backplane. If you are not
sure if the PCI board you are installing uses a feature connector, refer to Figure 7-4.
Feature connector
for Origin200
Feature
connector for
O2 and Octane
Figure 7-4 Example PCI Board With Feature Connectors