Connecting The Serial Cable; Logging In To The Server - Silicon Graphics Origin200 Owner's Manual

Using Another Computer or Workstation as the System Console

Connecting the Serial Cable

Connect one end of the cable to port of the Origin200 server, and the other end of the
1
cable (either DB9 or DIN-8) to the appropriate port on the workstation, for example port
.
2

Logging In to the Server

On the workstation, enter this command at a shell prompt:
cu Direct
You should see this message:
Connected
Press once or twice. You should see a login prompt from the Origin200 server:
Enter
IRIS login:
At the prompt, enter , , or another account name (if you have
IRIS login: root guest
already created one) as appropriate You see some brief messages and the following
prompt:
TERM = (vt100)
Enter the following terminal type:
iris-ansi
97