Figure 5-9 Removing The Pedestal Assembly (Feet) - Silicon Graphics Origin200 Owner's Manual

Chapter 5: Origin200 Cosmetic Features and Covers
124
3. Remove the pedestal assembly (to which the feet are attached). See Figure 5-9.
Place the system on its side on a sturdy work surface capable of supporting at
least 40 pounds (18 kg) and up to 75 pounds (34 kg). Be careful not to scratch or
damage the front bezel.
Using a #2 Phillips screwdriver, remove the four screws that hold the pedestal
assembly to the chassis and remove the pedestal assembly.
Figure 5-9 Removing the Pedestal Assembly (Feet)