Figure 8-17 How The 3.5-Inch Drives Are Numbered In An Origin200 System - Silicon Graphics Origin200 Owner's Manual

2. Locate the drive you want to remove.
The drives are numbered as shown in Figure 8-17.
Figure 8-17 How the 3.5-inch Drives Are Numbered in an Origin200 System
3. Remove the drive, as shown in Figure 8-18.
Pull the locking lever down.
Grasp the lever and pull the drive straight out of the chassis.
Installing, Removing, and Configuring 3.5-Inch Peripherals
Slot 6 (SCSI ID 6)
Slot 1 (SCSI ID 1)
177