Figure 7-5 Attaching A Feature Connector Cable To The Pci Backplane - Silicon Graphics Origin200 Owner's Manual

Installing a PCI Option Board
Locate the feature-connector cable in the PCI board shipment. See Figure 7-5.
Attach one end of the feature-connector cable to the connector next to the
desired PCI slot on the Origin200 PCI backplane, as shown in Figure 7-5.
Feature-connector cable
PCI backplane feature-connector
PCI backplane
Slot 5
Rear of System
Figure 7-5 Attaching a Feature Connector Cable to the PCI Backplane
149