Locking The Chassis; Figure 5-1 Locking The Chassis With The Locking Tabs - Silicon Graphics Origin200 Owner's Manual

Chapter 5: Origin200 Cosmetic Features and Covers
114

Locking the Chassis

To lock the chassis, use the two metal tabs that are provided with the system. Figure 5-1
provides an overview of the process.
Figure 5-1 Locking the Chassis With the Locking Tabs
Follow these steps to lock the chassis (refer to Figure 5-1).
1. Place the two locking tabs together, flat, so that the pivot points join.
2. Insert the two tabs into the tab slot at the rear of the chassis.
3. Spread tabs apart in a scissor-like fashion so that the two exposed holes in the tabs
align.
4. Insert a lock, cable, or other device through the holes in the tabs.