6. Install DIMMs in pairs, starting with the pair farthest away from the center of the
banks and working inward. Figure 6-3 shows the grouping of DIMM pairs:
Front of system
Socket numbers
Figure 6-3
How DIMM Pairs Are Grouped in the Origin200 Server
Figure 6-3 shows one pair of DIMMs installed in bank 0 (all modules must have
memory in bank 0; if you have a two-module system, both must have memory
in bank 0).
If you are installing one additional pair of DIMMs, install them in bank 1.
Install a third pair of DIMMs in bank 2.
Install a fourth pair of DIMMs in bank 3.
Bank 0
Bank 2
1 3 5 7
8 6 4 2
Bank 3
Bank 1
Rear of system
Installing Memory
131