Figure 8-18 Removing A 3.5-Inch Drive From An Origin200 Server - Silicon Graphics Origin200 Owner's Manual

Chapter 8: Installing and Configuring Peripherals
1
3
178
Removing a 3.5-inch Drive from an Origin200 Server
Figure 8-18
4. If you are not replacing the drive with another peripheral, cover the open slot with a
plastic blanking plate, as shown in Figure 8-18.
Always cover an open peripheral slot with a plastic blanking plate to ensure
Note:
proper cooling air flow and electromagnetic interference (EMI) shielding in the
Origin200 chassis.
2
4