Replacing The Scsi Backplane; Figure 10-1 Removing The Chassis Access Cover - Silicon Graphics Origin200 Owner's Manual

Chapter 10: Removing and Replacing Internal Components
200
Removing the Chassis Access Cover
Figure 10-1
6. Attach one end of a grounding strap to your wrist and the other to a metal portion
of the Origin200 chassis.
Warning:
Whenever you work on internal components, always use a grounding
(wrist) strap to prevent the flow of potentially damaging static electricity.
You are now finished preparing the system for servicing. Proceed with the next
appropriate section, depending upon which component you are replacing.

Replacing the SCSI Backplane

If you have not done so already, follow the procedures in "Preparing the Origin200 for
Servicing" to make sure the system is opened up and ready to work on.