Origin200 Cosmetic Features And Covers; Locking The System; Locking The Front Door - Silicon Graphics Origin200 Owner's Manual

5.

Locking the System

Chapter 5

Origin200 Cosmetic Features and Covers

This chapter describes the covers, doors, and other cosmetic features of the Origin200
server:
• "Locking the System" on page 113
• "Adjusting the Feet" on page 115
• "Removing the Front Door" on page 116
• "Removing the System Cover and Chassis Access Door" on page 118
• "Removing the Side Panel, Feet, and Exterior Plastic Parts of a Tower System" on
page 121
The Origin200 provides two mechanisms to physically lock the system:
• a key lock on the front door
• removable tabs to lock the chassis cover
Both of these mechanisms are designed to provide enough security for your system that,
if it is locked, the only way to remove components from the server, or to move it, is to
destroy some part of the server.

Locking the Front Door

To lock the front door, follow these steps:
1. Insert one of the keys (provided with the system) into the lock on the front door.
2. Turn it 1/4 turn (90-degrees) to the right (clockwise).
3. Remove the key.
113