Figure 3-6 Attaching The Plastic End Caps To A Rackmounted Server - Silicon Graphics Origin200 Owner's Manual

Chapter 3: Installing an Origin200 System in a Rack
70
3. Slide the server back into the rack.
4. Secure the server to the rack from the front, using four of the .
5. Attach the plastic end caps to the front of the server to conceal the mounting flange,
as shown in Figure 3-6.
Figure 3-6 Attaching the Plastic End Caps to a Rackmounted Server
The system is shipped with two pairs of end caps: one for 19-inch racks and one
for 21-inch racks. Use whichever is appropriate for your installation.