List Of Figures - Silicon Graphics Origin200 Owner's Manual

List of Figures

Sources of Additional Information About Origin200 xxiii
Figure i
Two-Module Origin200 System, Front View 4
Figure 1-1
Two-Module Origin200 System, Rear View 5
Figure 1-2
Two-Module Origin200 Server in a Rack 6
Figure 1-3
Logic Carrier 9
Figure 1-4
The Origin200 Main System Board and CPU Daughter Card 11
Figure 1-5
PCI Backplane and Slot IDs 13
Figure 1-6
Layout of DIMM Sockets on the Origin200 Main System Board 14
Figure 1-7
Origin200 5.25-inch Peripheral Carrier and Drive Bay 16
Figure 1-8
Origin200 3.5-inch Drive, Sled, and Bay 17
Figure 1-9
Air Flow Through the Origin200 Server 22
Figure 1-10
Locations and Numbering of Fans in the Origin200 Server 23
Figure 1-11
Origin200 Power and Grounding (Earthing) Overview 31
Figure 2-1
Minimum Clearances for the Origin200 Server,
Figure 2-2
Tower Configuration 33
Items Included With the Origin200 Server, Tower Configuration 34
Figure 2-3
Basic Items Included With the Origin200 Server,
Figure 2-4
Rackmountable Configuration 35
Origin200 Connectors 36
Figure 2-5
SCSI Drive ID Numbering for 3.5-Inch Drives 39
Figure 2-6
Installing 3.5-Inch Drives in the Origin200 Server 40
Figure 2-7
Removing the Front Door, Tower Configuration 41
Figure 2-8
Removing the Front Door, Rackmount Configuration 42
Figure 2-9
Removing the 5.25-Inch Peripheral Carrier 43
Figure 2-10
Removing a Blanking Plate and the Rear Access Plate
Figure 2-11
From the Peripheral Carrier 44
Inserting a 5.25-Inch Drive in the Peripheral Carrier 45
Figure 2-12
Attaching a Power Connector to a 5.25-inch Drive 46
Figure 2-13
xiii